Lightweight - Plain Chain With Drill Head (PVC)

This chain is intended for use with a thinner shaft, or a power source with less torque. The chains are made from 3,5mm stainless steel, so they are significantly lighter, and need less torque to achieve the same result.

The chain does not have hard metal bits fused to the cutting edge, so it is suitable for use in PVC (ABS) pipes. It has the added advantage of a Croco drill head in the front for cutting roots, or grind up a failed liner within a PVC pipe whilst preventing damage to the pipe wall.

It is made from stainless steel to prevent oxidation and is adjustable, so you can clean various smaller diameter pipes with the same chain if you spread the hubs further apart when you assemble them on the shaft. They use centrifugal force to center the tool inside the pipe. so you can be assured that the chain will clean the entire pipe wall.

They mount to a 6mm (1/4") , 8mm (5/16") ,10mm (3/8") & 12mm (1/2") flex shaft, with set screws.

Suitable for cleaning PVC pipes from 50mm (2”) to 150mm (6") depending on which size you select. The opening diameter of the drill head is 16mm for shafts ranging from 6mm(1/4") to 8mm (5/16") and 20mm for shafts ranging from 10mm(3/8") to 12mm (1/2")

The unit has three individual chains per set

Points to note:

These products are intended to be used by trained professionals in the sewer cleaning trade. They do not come with instructions. If you would like training please make contact with us, and we will guide you.

Product pictures may vary in colour and design depending on the size and diameter that you order.