90 degree Silicone T shaped bladder

Silicone only has a surface energy of 24 dynes/cm, so the molecular force between epoxy and silicone is weak. This makes silicone an ideal material for creating a packer for cured in place pipe repairs, because the resin will slide off of the silicone surface as opposed to a rubber bladder which will react negatively when in contact with epoxy.

Since silicone bladders are more efficient, they can also be thinner. This bladder tube is only 1mm thick.

They have a seamless weld which makes them strong, so the chances of them leaking is reduced significantly.

Recommended pressure: 0,7bar to a maximum of 1,0 bar. (Except the 200mm upward. The recommended pressure for these is 0,5 bar to a maximum of 0,7bar.)

Bladders are 10% below nominal diameter. So for example DN100 is 90 mm DN150 is 135mm etc. When pressurized they expand to the pipe diameter

Points to note:

These products are intended to be used by trained professionals in the sewer cleaning trade. They do not come with instructions. If you would like training please make contact with us, and we will guide you.

Product pictures may vary in color and design depending on the size and diameter that you order.